Installing wxWindows 2.1 ------------------------ This is a beta release of wxWindows 2.1 for Microsoft Windows 95, 98 and NT. This is not a production release, although a huge number of bugs found in earlier versions of wxWindows have been fixed. IMPORTANT NOTE: If you experience problems installing, please re-read this instructions and other related files (changes.txt, readme.txt, notes on the Web site) carefully before mailing wx-users or the author. Preferably, try to fix the problem first and then send a patch to the author. Please report bugs using the bug report form on the wxWindows web site. Unarchiving ----------- A setup program is provided (setup.exe) to automatically copy files to a directory on your hard disk. Do not install into a path that contains spaces. The installation program should set the WXWIN environment variable, which will be activated when your machine is rebooted. The setup program contains the following: - All common, generic and MSW-specific wxWindows source; - samples; - documentation in Windows Help format; - makefiles for most Windows compilers, plus BC++ and VC++ IDE files; - JPEG library source; - TIFF library source; - Object Graphics Library; - Tex2RTF source; - Dialog Editor binary. Alternatively, you may unarchive the set of .zip files by hand, where x is the minor version number and y is the release number: wx2_x_y_gen.zip Generic source code and samples (required) wx2_x_y_msw.zip Windows-specific source code and samples (required) wx2_x_y_doc.zip Documentation source code (not required) wx2_x_y_hlp.zip WinHelp documentation wx2_x_y_pdf.zip Acrobat PDF documentation wx2_x_y_htm.zip HTML documentation wx2_x_y_vc.zip MS VC++ 5.0 project files wx2_x_y_cw.zip Metrowerks CodeWarrior project files wx2_x_y_bc.zip BC++ 5 project files jpeg.zip Use this to allow wxImage to read and write JPEG files tiff.zip Use this to allow wxImage to read and write TIFF files Unarchive the required files plus any optional documentation files into a suitable directory such as c:\wx. Other add-on packages are available from the wxWindows Web site, such as: - mmedia.zip. Audio, CD, video access for Windows and Linux. - ogl3.zip. Object Graphics Library: build network diagrams, CASE tools etc. - tex2rtf3.zip. Tex2RTF: create Windows Help, HTML, and Word RTF files from the same document source. General installation notes -------------------------- Alter your WXWIN environment variable to point to this directory. For Cygwin or Mingw32 compilation, make sure WXWIN contains only forward slashes. If installing from the CVS server, copy include/wx/msw/setup0.h to include/wx/msw/setup.h and edit the resulting file to choose the featrues you would like to compile wxWindows with[out]. Compilation ----------- The following sections explain how to compile wxWindows with each supported compiler. Visual C++ 4.0/5.0/6.0 compilation ---------------------------------- Using project files (VC++ 5 and 6 only): 1. Unarchive wx2_x_y_vc.zip, the VC++ 5/6 project makefiles. 2. Open src/wxvc.dsp, set Debug or Release configuration for the wxvc project, and compile. Alternatively, use Batch Build to build both Debug and Release configurations. This will produce lib/wx.lib (release) and lib/wxd.lib (debug), plus various subordinate libraries. It assumes you have the TIFF and JPEG source, which is already in the setup version of the distribution. The project file src/wxvc_dll.dsp will make a DLL version of wxWindow, which will go in lib/wxdll.[lib,dll] and lib/wxdlld.[lib,dll]. 3. Open a sample project file, choose a configuration such as Debug using Build | Set Active Configuration..., and compile. The project files don't use precompiled headers, to save disk space, but you can switch PCH compiling on for greater speed. NOTE: you may also use samples/SamplesVC.dsw to access all sample projects without opening each workspace individually. You can use the Batch Build facility to make several samples at a time. Using makefiles: 1. Make sure your WXWIN variable is set. 2. If you do NOT have the TIFF or JPEG source code, please remove the tiff and jpeg targets from the 'all' target in src\msw\makefile.vc. Also ensure the settings in include\wx\msw\setup.h specify not to use JPEG or TIFF. 3. Change directory to wx\src\msw. Type: 'nmake -f makefile.vc' to make the wxWindows core library with debug information (wx\lib\wxd.lib), then 'nmake -f makefile.vc cleanall FINAL=1' 'nmake -f makefile.vc FINAL=1' to make the wxWindows core library without debug information (wx\lib\wx.lib). 4. Change directory to wx\samples and type 'nmake -f makefile.vc' to make all the samples. You can also make them individually. Makefile notes: Use the 'cleanall' target to clean all objects, libraries and executables. To build the release version using makefiles, add FINAL=1 to your nmake invocation, both when building the library and for samples. You MUST use the 'cleanall' target (with FINAL=1 or FINAL=0) before making a different configuration, because otherwise object files used to build the previous configuration may be used accidentally for the current configuation. You might see this manifested in unexpected link errors or warnings. This problem doesn't occur when using project files to build wxWindows. Note that the wxWindows core library allows you to have debug and release libraries available simultaneously, by compiling the objects in different subdirectories, whereas samples must be cleaned and re-made to build a different configuration. To build the DLL version using makefiles: 1. Change directory to wx\src\msw. Type 'nmake -f makefile.vc dll pch' to make both a suitable DLL and import library, and to build a suitable precompiled header file for compiling applications. The resulting libraries are called: wx\lib\wx[version].lib(dll) (debug version) wx\lib\wx[version].lib(dll) (release version, using FINAL=1) 2. Invoke a sample makefile with 'nmake -f makefile.vc WXUSINGDLL=1' (or edit src\makeprog.vc to set WXUSINGDLL to 1 for all applications). Note (1): if you wish to use templates, please edit include\wx\msw\setup.h and set wxUSE_DEBUG_NEW_ALWAYS to 0. Without this, the redefinition of 'new' will cause problems in the headers. Alternatively, #undef new before including template headers. You will also need to set wxUSE_IOSTREAMH to 0 if you will be using templates, to avoid the non-template stream files being included within wxWindows. Note (2): libraries and applications generated with makefiles and project files are now (hopefully) compatible where static libraries are concerned, but please exercise caution nevertheless and if possible, use one method or the other. Note (3): VC++ 5's optimization code seems to be broken and can cause both compile and run-time problems: this can be seen when deleting an object Dialog Editor, in Release mode with optimizations on. If in doubt, switch off optimisations, although this will result in much larger executables. It seems possible that the library can be created with strong optimization, so long as the application is not strongly optimized. For example, in wxWindows project, set to 'Minimum Size'. In Dialog Editor project, set to 'Customize: Favor Small Code' (and no others). This will then work. Similarly, in VC++ 4, optimization can cause internal compiler errors, so edit src\makevc.env and change /O1 to /Od before trying build a release version of the library. Or, type: nmake -f makefile.vc noopt FINAL=1 and then resume compilation in the normal way. This will build troublesome files with no optimization. However, there now seems to be an internal linker error using VC++ 4, in addition to internal compiler errors for most of the samples, so this version of the compiler cannot be recommended! Note (4): some crash problems can be due to inconsistent compiler options. If strange/weird/impossible things start to happen please check (dumping IDE project file as makefile and doing text comparison if necessary) that the project settings, especially the list of defined symbols, struct packing, etc. are exactly the same for all items in the project. After this, delete everything (including PCH) and recompile. Note (5): for some further notes about upgrading your project files to be compatible with wxWindows 2.1.14, please see "Highlights of wxWindows 2.1.14" from the Download page of the web site or CD-ROM. Note (6): to create your own IDE files, see the technical note on the wxWindows web site or CD-ROM, entitled "Compiling wxWindows applications in the VC++ IDE". You can also copy .dsp and .dsw files from an existing wxWindows sample and adapt them. Visual C++ 1.5 compilation (16-bit) ----------------------------------- 1. Make sure your WXWIN variable is set, and uses the FAT (short name) form. 2. Change directory to wx\src\msw. Type 'nmake -f makefile.dos' to make the wxWindows core library. 3. Change directory to a sample, such as wx\samples\minimal, and type 'nmake -f makefile.dos'. Add FINAL=1 to your makefile invocation to build the release versions of the library and samples. Use the 'clean' target to clean all objects, libraries and executables. Borland C++ 4.5/5.0 compilation ------------------------------- Compiling using the makefiles: 1. Make sure your WXWIN variable is set, and uses the FAT (short name) form if doing a 16-bit compile. 2. Change directory to wx\src\msw. Type 'make -f makefile.b32' to make the wxWindows core library. Ignore the warnings about 'XXX' not found in library. 3. Change directory to a sample or demo such as samples\minimal, and type 'make -f makefile.b32'. 4. For release versions, recompile wxWindows and samples using 'make -f makefile.b32 clean' 'make -f makefile.b32 FINAL=1' for the library and samples. Note (1): the wxWindows library and (some) samples compile in 16-bit mode using makefile.bcc, but at present the wxWindows resource system is switched off in this mode. See issues.txt for details. Note (2): unfortunately most samples won't link in 16-bit mode, because the automatic data segment exceeds 64K. The minimal sample links and runs, however. Note (3): the wxWindows makefiles assume byte structure alignment. Please make sure that your own project or makefile settings use the same alignment, or you could experience mysterious crashes. To change the alignment, add a suitable option to the $(CFG) target code in src/msw/makefile.b32. Note (4): if you get undefined _SQL... symbols at link time, either install odbc32.lib from the BC++ CD-ROM into your BC++ lib directory, or set wxUSE_ODBC to 0 in include\wx\msw\setup.h and recompile wxWindows. The same applies if compiling using the IDE. Note (5): BC++ 4.5 (not 5.0) trips up over jdmerge.c in the JPEG folder; you will therefore need to set wxUSE_LIBJPEG to 0 in setup.h and remove the jpeg target from src\msw\makefile.b32, and remove jpeg from src\makeprog.b32. Note (6): If using C++Builder 4 and above (BC++ 5.4 and above), change LINK=tlink32 to LINK=ilink32 in src\makeb32.env. You may also need to disable wxUSE_LIBJPEG because there is a conflict in the BC++ headers (actually this problem seems to have gone away with 5.5 and SP1). Note (7): If you wish debug messages to be sent to the console in debug mode, edit src\makeb32.env and change /aa to /Tpe in LINK_FLAGS. Compiling using the IDE files: 1. Load src\bc32.ide (Release settings) 2. Go to Options|Project... and specify the correct BC++ include and lib path for your file structure. 3. Press F9 to compile the wxWindows library. 4. Load samples\bc32.ide. 5. Go to Options|Project... and specify the correct BC++ include and lib path for your file structure. 6. Press F9 to compile the samples (build each node separately if you prefer, by right clicking and choose Build Node). 7. Run each sample: you may need to run from each sample's directory since some (notably the wxHTML samples) look for files relative to the working directory. Note (1): the samples project file contains a selection of samples, and not all samples. The remaining samples can be made with the makefiles. See also the demos hierarchy which doesn't have any BC++ project files yet. Note (2): to make the png, xpm, zlib, jpeg and tiff libraries (needed for some samples) you need to compile them with bc32.ide. Note (3): the debug version of the wxWindows library is about 40 MB, and the release version is around 5 MB. See also the file bc_ide.txt for further instructions and details of how to create your own project files. Borland C++Builder compilation ------------------------------ C++Builder compilation is the same as for Borland C++ above. Tested with C++Builder 1.0 and 3.0. Only makefiles are currently supplied. Watcom C++ 10.6/11 compilation --------------------------- 1. Make sure your WXWIN variable is set, and uses the DOS short name form. 2. Change directory to wx\src\msw. Type 'wmake -f makefile.wat' to make the wxWindows core library. 3. Change directory to wx\samples\minimal and type 'wmake -f makefile.wat' to make this sample. Repeat for other samples of interest. Note (1): setup.h overrides wxUSE_LIBJPEG and sets it to 0, since imagjpeg.cpp doesn't compile. Note (2): makewat.env uses the odbc32.lib supplied in wxWindows' lib\watcom directory. See the notes in that directory. Note (3): if variant.cpp is compiled with date/time class options, the linker gives up. So the date/time option is switched off for Watcom C++. Also, wxAutomationObject is not compiled with Watcom C++. Note (4): if Watcom can't read the precompiled header when building a sample, try deleting src\msw\watcom.pch and compiling the sample again. Note (5): if you get _popen_ and _pclose_ link errors, try recompiling wxWindows with XPM support disabled in setup.h. Alternatively, make sure these lines exist at the top of src\xpm\xpmi.h: // Added by JACS for Watcom C++/wxWindows compilation (no popen/pclose functions) #ifdef __WATCOMC__ #define NO_ZPIPE #endif Metrowerks CodeWarrior compilation ---------------------------------- 1. Downloaded and unzip wx2_x_y_cw.zip. 2. Load the make_cw.mcp project in wx\src, and compile. 3. Load the make_cw.mcp project in wx\samples\minimal, and compile. Further project files for samples will be available in due course. Note (1): you need CodeWarrior Pro 4 plus the patches to 4.1 from the Metrowerks Web site. Note (2): unfortunately these files are not yet up-to-date for the current release. Symantec C++ compilation ------------------------ 1. Make sure your WXWIN variable is set, and uses the FAT (short name) form. 2. Edit setup.h and set wxUSE_DRAG_AND_DROP to 0. 3. Change directory to wx\src\msw. Type 'make -f makefile.sc' to make the wxWindows core library. 4. Change directory to wx\samples\minimal and type 'make -f makefile.sc' to make this sample. Note: the minimal sample doesn't link properly ('Error: no start address'). 32-bit compilation only (partially) supported at present, using SC++ 6.1. Some functionality is missing using this compiler (see makefile). Add -D__WIN95__ if your SC++ has Windows 95 support, and ignore Step (2). 16-bit compilation is left as an excercise for the user! Salford C++ compilation ----------------------- 1. Make sure your WXWIN variable is set, and uses the FAT (short name) form. 2. Edit SALFORDDIR and RESOURCEDIR in src/makesl.env as per notes. 3. Change directory to wx\src\msw. Type 'mk32 -f makefile.sl all' to make the wxWindows core library. 4. Change directory to wx\samples\minimal and type 'mk32 -f makefile.sl' to make this sample. Unfortunately, Salford C++ seems to have problems with its code generation for operations on objects, as seen in wxFrame::OnMenuHighlight (minimal sample) or wxWindow::SetValidator (mdi sample). Also the the debugging version of the library is 90MB, with samples coming in at 40MB :-) However, wxWindows at least makes a good test suite for improving the compiler. Cygwin b19/b20/Mingw32 compilation ---------------------------------- wxWindows 2 supports Cygwin (formerly GnuWin32) b19, b20, Mingw32, and Mingw32/EGCS. Thanks are due to Keith Garry Boyce (garp@opustel.com) and Cygnus for making it all possible. From wxWindows 2.0 beta 9, both Cygwin and Mingw32 (the minimal distribution of Cygwin) can be used with the same makefiles. Here are the steps required: - Retrieve and install the latest beta of Cygwin, or Mingw32, as per the instructions with either of these packages. - If using Mingw32 (including the EGCS variant), you need some extra files to use the wxWindows makefiles. You can find these files in ports/mingw32 on the ftp site or CD-ROM, as extra.zip. These should be extracted to the Mingw32 directory. If you have already have downloaded bison, flex, make, rm, cp, mv from elsewhere, you won't need this. If using Mingw32 2.8.1, see also see mingw32.txt in this directory (docs/msw) about a fix that has to be applied to a Mingw32 header file. If using Mingw32 2.95 and below with wxWindows 2.1 or above, you must hand-patch in Mingw32-gcc295.patches (located in the top-level of the wxWindows 2 installation). Mingw32 2.95.2 and above contain the fixes already. - Modify the file wx/src/cygnus.bat (or mingw32.bat or mingegcs.bat) to set up appropriate variables, if necessary mounting drives. Run it before compiling. - For Cygwin, make sure there's a \tmp directory on your Windows drive or bison will crash (actually you don't need this for ordinary wxWindows compilation: a pre-generated .c file is supplied). - Edit wx/src/makeg95.env and set the MINGW32 variable at the top of the file to either 1 (you have Mingw32) or 0 (you have Cygwin32). If using MINGW32, also set the MINGW32VERSION variable appropriately. - Mingw32 may not support winsock.h, so if you have a problem here, comment out socket-related files in src/msw/makefile.g95. - Set your WXWIN variable to where wxWindows is installed. *** IMPORTANT: For Cygwin/Mingw32, use forward slashes in the path, not backslashes. - Use the makefile.g95 files for compiling wxWindows and samples, e.g.: > cd c:\wx\src\msw > make -f makefile.g95 > cd c:\wx\samples\minimal > make -f makefile.g95 Ignore the warning about the default entry point. - Use the 'strip' command to reduce executable size. - With Cygnus Cygwin, you can invoke gdb --nw myfile.exe to debug an executable. If there are memory leaks, they will be flagged when the program quits. - If using GnuWin32 b18, you will need to copy windres.exe from e.g. the Mingw32 distribution, to a directory in your path. All targets have 'clean' targets to allow removal of object files and other intermediate compiler files. Notes: 1. See also the Cygwin/Mingw32 on the web site or CD-ROM for further information about using wxWindows with these compilers. 2. libwx.a is 48 MB or more - but much less if compiled with no debug info (-g0) and level 4 optimization (-O4). 3. There's a bug in Mingw32 headers for some early distributions. in include/windows32/defines.h, where it says: #define LPSTR_TEXTCALLBACKA (LPSTR)-1L) it should say: #define LPSTR_TEXTCALLBACKA ((LPSTR)-1L) (a missing bracket). 4. If there's a problem with the copy command in src/msw/makefile.g95, you may need to change the COPY and COPYSEP variables in makeg95.env. 5. If there's a problem executing the windres program, try commenting out RCPREPROCESSOR in makeg95.env. 6. OpenGL support should work with Mingw32 as-is. However, if you wish to generate import libraries appropriate either for the MS OpenGL libraries or the SGI OpenGL libraries, go to include/wx/msw/gl and use: dlltool -k -d opengl.def -llibopengl.a for the SGI DLLs, or dlltool -k -d opengl32.def -llibopengl32.a and similarly for glu[32].def. References: - The GNU-WIN32 site is at http://www.cygnus.com/gnu-win32/ - Mingw32 is available at: ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/mingw32/gcc-2.95/ - See also http://web.ukonline.co.uk/julian.smart/wxwin/gnuwin32.htm TWIN32 and gcc on Linux ----------------------- The wxWindows 2 for Windows port may be compiled using the TWIN32 emulator package from www.willows.com. However, TWIN32 is by no means finished so this should be taken as something to think about for the future, rather than a tool for writing products with. Use makefile.twn in much the same way as makefile.g95, as described above. Not all sample makefiles are supplied yet. For some reason, I found I had to copy TWIN32's Windows resource compiler (rc) to the current working directory for it to be found. General Notes ------------- - Debugging: under Windows 95, debugging output isn't output in the same way that it is under NT or Windows 3.1. Please see DebugView (bin/dbgview.exe in the distribution), also available from http://www.sysinternals.com and on the wxWindows CD-ROM under Packages. - If you are installing wxWindows 2 from CVS, you may find that include/wx/msw/setup.h is missing. This is deliberate, to avoid developers' different setup.h configurations getting confused. Please copy setup0.h to setup.h before compiling.